2 x 3.3Ah batteries
- TOUGH TOOL IP - IP56 Approval
- High Power with 31.9Nm for applications with high torque
- Overheat Protection System (OPS) for motor protection against
overload
- Extraordinary endurance with up to 350 screws 6x60mm in softwood
- Hammer drilling function for wider application range
- Charger for all Li-Ion batteries 10,8-28,8V
14.4V Hammer Drill & Driver "TOUGH TOOL IP" with compact body and leading endurance
| Power Supply |
| Battery | 14.4V Li-Ion (Type EY9L44B) 3.3Ah (accord.IEC) |
| 2nd Battery | yes |
| Charging Time full (minutes) | 65.0 |
| Max. Torque (Nm) |
| Instant torque | 44.1 |
| Stalling torque | 31.9 |
| Speed at No Load (rpm) |
| Low | 70 - 400 |
| High | 200 - 1400 |
| Clutch Stages | 18 + Drill + Hammer drill position |
| Chuck Size (mm) | 13.0 |
